For trees to grow healthy, they need a lot of maintenance. Several different activities are involved in maintenance, and one of them is pruning, which is also called trimming. The environment provides natural pruning to trees that exist in the wild. However, for trees that are grown as part of landscape, proper maintenance must be provided to ensure proper structural integrity as well as aesthetic appeal. This is worth knowing about Round Rock Tree Trimming.
For trimming to be done correctly without damaging the tree, it is important that its biology is well understood. Doing this task improperly can lead to serious damage which may be impossible for the plant to recover from for its entire lifespan. Such damage may also significantly shorten the life of the plant involved.
When trimming, it is important to be careful which branches are removed and which ones are not. With every cut, the potential of the plant to grow is affected in some way. Thus, no branch should be removed without a reason for doing so. Thus, one should consider the three main reasons why branches are removed. These reasons include improving form, reducing risk, and removing dead branches.
Branches can also be removed so that more light can reach the landscape below or other parts of the crown. In mature trees, branches are removed to serve as both corrective and preventive measure. The reason for this is that routine thinning has been determined to not necessarily lead to any improvement in health of trees. The plant needs to be inspected thoroughly before the job is started.
The inspection must be started from up the tree downwards as the inspector determines which branches to retain and which ones to remove. Similarly, the trimming must be started from the top moving downwards. Doing this prevents removal of branches that should otherwise not be removed. One of the major rules that apply in this job is not to cut more than a quarter of all branches.
When removing, one should target branches that are too big in comparison to the main trunk. The branches should be 30 percent or smaller than the main trunk. This is meant to ensure safety and reduce risk of the branch falling. If the plant is a deciduous one, the branches should not be removed more than 30 percent of the height from the bottom.
Most trees only have one trunk. However, it is possible to find trees that have multiple trunks. In such cases, the main trunk should be identified and the rest should be removed. Defects should be identified first before one start to prune. If one is interested in improving the aesthetics of the plant, all cuts should be painted. Although painting may make cuts look beautiful, the paint does not stop decay from happening.
Before one starts this job, they should have all necessary tools in place. The tools should be kept in good condition and properly sharpened. A pole pruner can be used for branches that sit very high. One should hire a professional arborist if they have any major work that they need done.
For trimming to be done correctly without damaging the tree, it is important that its biology is well understood. Doing this task improperly can lead to serious damage which may be impossible for the plant to recover from for its entire lifespan. Such damage may also significantly shorten the life of the plant involved.
When trimming, it is important to be careful which branches are removed and which ones are not. With every cut, the potential of the plant to grow is affected in some way. Thus, no branch should be removed without a reason for doing so. Thus, one should consider the three main reasons why branches are removed. These reasons include improving form, reducing risk, and removing dead branches.
Branches can also be removed so that more light can reach the landscape below or other parts of the crown. In mature trees, branches are removed to serve as both corrective and preventive measure. The reason for this is that routine thinning has been determined to not necessarily lead to any improvement in health of trees. The plant needs to be inspected thoroughly before the job is started.
The inspection must be started from up the tree downwards as the inspector determines which branches to retain and which ones to remove. Similarly, the trimming must be started from the top moving downwards. Doing this prevents removal of branches that should otherwise not be removed. One of the major rules that apply in this job is not to cut more than a quarter of all branches.
When removing, one should target branches that are too big in comparison to the main trunk. The branches should be 30 percent or smaller than the main trunk. This is meant to ensure safety and reduce risk of the branch falling. If the plant is a deciduous one, the branches should not be removed more than 30 percent of the height from the bottom.
Most trees only have one trunk. However, it is possible to find trees that have multiple trunks. In such cases, the main trunk should be identified and the rest should be removed. Defects should be identified first before one start to prune. If one is interested in improving the aesthetics of the plant, all cuts should be painted. Although painting may make cuts look beautiful, the paint does not stop decay from happening.
Before one starts this job, they should have all necessary tools in place. The tools should be kept in good condition and properly sharpened. A pole pruner can be used for branches that sit very high. One should hire a professional arborist if they have any major work that they need done.
About the Author:
Round Rock tree trimming services provide customers with everything they need to keep their gardens in tip top condition. To read our customer reviews now click here http://www.keepaustingreen.com/tree-services/tree-trimming.
No comments:
Post a Comment