You can not do the custom gun painting without a gun so go and get one. You must consider that they will look great when coated with paints. This is necessary especial when not everything will look good with them. The shop assistant that sells these times have to be asked for recommendations since they know more in the field.
Do not forget that it is very important that you have drawn a plan for the process. This must have guidelines that you will follow when you started the process. However, you must decide on these parts that you will spray with colors. Include that on your plan so you have something to look over.
And then you got to include the color on the plan as well. If you want a digital camouflage, then it is up to you. You can use any colors that you like as long as it will match to your taste and the design that you wanted to achieve. And make sure you will buy spray paints which are flat.
It is very important that you provided a place where you will start the process. As much as possible you will need an open area for this. Not too windy and not too sunny. Or they will just dry the paint easily without you finishing the coating first. And when you use table, cover it with newspaper.
And now, you got to tape it with a masking tape. This shall be done on the parts you do not want to spray colors to. This is also needed at the muzzle of the guns that you will be working on. Or else, they will clog the item. And then bereave it from producing a large bang.
Now you have to cover the barrel with the aid of the rolled out tissues. This has to be done since you certainly do not want to color it. This will take time in drying and you might just end up damaging the whole piece. So the best thing that you shall always do is to cover this with the avoid of rolled tissue.
Do not forget that it is very important that you removed the bullets before you started the covering and all. They are too dangerous and they could kill a person. And when you are hiding it, keep this out of sign as well as out of reach. Most especially when you have kids.
Now you can start the coating process. You have to spray it using the lighter colors as the base of the item. Then you can go and use the darker colors ones when the light colors have dried up. You need to manifest your plan into this. And after that, you can place it somewhere where it will dry.
After the custom gun painting you can now remove the tape that you have taped on the parts you do not want to spread paints over. When you are removing it, you got to point that weapon down so that the dray paints will not fall into the inner of the item. And there you go reader, the process is finished and you can use it already.
Do not forget that it is very important that you have drawn a plan for the process. This must have guidelines that you will follow when you started the process. However, you must decide on these parts that you will spray with colors. Include that on your plan so you have something to look over.
And then you got to include the color on the plan as well. If you want a digital camouflage, then it is up to you. You can use any colors that you like as long as it will match to your taste and the design that you wanted to achieve. And make sure you will buy spray paints which are flat.
It is very important that you provided a place where you will start the process. As much as possible you will need an open area for this. Not too windy and not too sunny. Or they will just dry the paint easily without you finishing the coating first. And when you use table, cover it with newspaper.
And now, you got to tape it with a masking tape. This shall be done on the parts you do not want to spray colors to. This is also needed at the muzzle of the guns that you will be working on. Or else, they will clog the item. And then bereave it from producing a large bang.
Now you have to cover the barrel with the aid of the rolled out tissues. This has to be done since you certainly do not want to color it. This will take time in drying and you might just end up damaging the whole piece. So the best thing that you shall always do is to cover this with the avoid of rolled tissue.
Do not forget that it is very important that you removed the bullets before you started the covering and all. They are too dangerous and they could kill a person. And when you are hiding it, keep this out of sign as well as out of reach. Most especially when you have kids.
Now you can start the coating process. You have to spray it using the lighter colors as the base of the item. Then you can go and use the darker colors ones when the light colors have dried up. You need to manifest your plan into this. And after that, you can place it somewhere where it will dry.
After the custom gun painting you can now remove the tape that you have taped on the parts you do not want to spread paints over. When you are removing it, you got to point that weapon down so that the dray paints will not fall into the inner of the item. And there you go reader, the process is finished and you can use it already.
No comments:
Post a Comment